Washington State Contractor's License Number CHRISI1034J5
Toll Free 1- 877- 679 - 8731

Pre-Engineered Steel Building Wall Types

HUSKY HI-RIB provides a tough durable wall or roof system and covers 36". It is composed of four major ribs 16" on center and 1 1/4" high. The higher rib provides the extra strength that is needed for longer spans on industrial jobs while creating an attractive, clean appearance.

SHADOW-RIB serves as an attractive and cost efficient architectural wall panel. It covers 36". It is composed of four major reversed ribs 16" on center and 1 1/4" deep. The higher rib provides the extra strength that is needed for longer spans on industrial jobs and the deeper shadow line provides a unique architectural appearance.

WEATHER SPAN© provides a benchmark architectural design. Our state of the art system of interlocking panels requires no through fasteners eliminating a potential source of roof leak. It covers 18" with a 6" high rib at 9" centers. Available in both Kynar™ and silicone modified polyester paint systems. All galvanized material has G-90 coating and conforms to A.S.T.M. spec. A653-98 SS Grade 40 (40,000 lb. min. yield strength) or galvalume coating conforming to A.S.T.M. A-796-97 SS Grade 40 (40,000 lb. yield strength).

MARK 16 PANEL is Mechanically Seamed, covers 16" and is comprised of two major ribs 6" high. This standing seam system's high interlocking ribs provide exceptional strength and dramatic appearance, while reducing a potential source of roof leaks by eliminating fastener penetrations. Mark 16 is available in 64 ga. or 66 ga. galvalume or galvanized panel substrate. All galvanized material has G-90 coating and conforms to A.S.T.M. A653-98 SS Grade 40 (40 000 lb. min. yield strength) or galvalume coating conforming to A.S.T.M. A-796-97 Grade 40.

CF-16 CONCEALED FASTENER PANEL provides a bold, attractive appearance. It covers 16" with an overall depth of 3". The face of each panel is formed with a 6 inch wide by 1 1/6 inch deep inset in the middle of the 16 inch width. CF-16 is available in 64 ga. and 66 ga. galvalume or galvanized panel substrate. Smooth or embossed finishes are available. All galvanized material has G-90 coating, and conforms to A.S.T.M. A653-98 SS Grade 40 (40,000 lb. min. yield strength), or galvalume coating, AZ 50/55 conforming to A.S.T.M. A-796-97 SS Grade 40 (40,000 lb. min. yield strength).